Printed Pattern Vinyl - Adhesive

Application Instructions:
  • Cut image right (not mirrored) on printed side
  • Remove excess vinyl from image
  • Place transfer tape (pre-mask) on top of design and squeegee in place
  • Flip over and remove back 
  • Apply to clean surface
Tips & Tricks:
  • Clean surface with soap and water; NOT alcohol. Alcohol can leave a slight greasy residue. 
  • Application spray can be used to help with re-positioning decal before squeegeeing
  • Squeegee in place by working from the center fanning outwards
  • Remove all air bubbles
  • After application, remove mask slowly. If any details start to lift, simply lay mask back in place and squeegee more firmly.